打开配置文件
命令代码
# vi /etc/sysconfig/iptables
正确的配置文件
配置代码
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT
:FORWARD ACCEPT
:OUTPUT ACCEPT
-A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT
-A INPUT -j REJECT –reject-with icmp-host-prohibited
-A FORWARD -j REJECT –reject-with icmp-host-prohibited
COMMIT
配置通配代码
-A INPUT -m state –state NEW -m tcp -p tcp –dport * -j ACCEPT
注意点:新开放的端口一定要在端口22后面
重启防火墙使配置生效
命令代码
# /etc/init.d/iptables restart
其它
查看开放端口
命令代码
# /etc/init.d/iptables status
关闭防火墙
命令代码
# /etc/init.d/iptables stop