k8s安装和部署详解

文章目录

- k8s安装和部署详解
- - - kubernetes官方提供的三种部署方式
    - - minikube
      - kubeadm
      - 二进制包
    - 使用kubeadm方式安装
    - - 1、准备环境
      - 2、确认docker已经安装好，启动docker，并且设置开机启动
      - 3、配置docker使用systemd作为默认Cgroup驱动
      - 4、关闭swap分区
      - 5、重新命名主机，修改hosts文件
      - 6、安装kubeadm，kubelet，kubectl
      - 7、matser主机执行
      - 8、在node节点服务器加入k8s集群
      - 9、查看master上的所有节点服务器

kubernetes官方提供的三种部署方式

minikube

Minikube是一个工具，可以在本地快速运行一个单点的Kubernetes，仅用于尝试Kubernetes或日常开发的用户使用。部署地址：使用 Minikube 创建集群 | Kubernetes

kubeadm

Kubeadm也是一个工具，提供Kubeadm init和kubeadm join，用于快速部署Kubernetes集群。部署地址：Kubeadm | Kubernetes

二进制包

推荐，从官方下载发行版的二进制包，手动部署每个组件，组成Kubernetes集群。下载地址：https://github.com/kubernetes/kubernetes/releases

使用kubeadm方式安装

1、准备环境

四台服务器：

k8s-master 192.168.175.110

k8s-node1 192.168.175.111

k8s-node2 192.168.175.112

k8s-node3 192.168.175.113

关闭防火墙和selinux

systemctl disable firewalld
systemctl stop firewalld
setenforce 0
sed -i '/SELINUX/ s/enforce/disabled/g' /etc/sysconfig/selinuxcat << EOF >> /etc/sysctl.conf   追加到内核会读取的参数文件里
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_nonlocal_bind=1
net.ipv4.ip_forward=1
vm.swappiness=0
EOF
sysctl -p	让内核重新读取数据，加载生效

建议先给每台服务器起好名字，使用固定的ip地址，防止后面因为IP地址的变化，导致整个集群异常

2、确认docker已经安装好，启动docker，并且设置开机启动

[root@k8s-master ~]#  systemctl enable docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
[root@k8s-master ~]#  systemctl start docker
[root@k8s-master ~]# ps aux|grep docker
root      9705  0.5  4.6 1150216 47300 ?       Ssl  21:02   0:00 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
root      9843  0.0  0.0 112824   976 pts/2    S+   21:02   0:00 grep --color=auto docker

3、配置docker使用systemd作为默认Cgroup驱动

每台服务器上都要操作，master和node上都要操作

cat << EOF > /etc/docker/daemon.json
{"exec-opts":["native.cgroupdriver=systemd"]
}
EOF#重启docker
systemctl restart docker

4、关闭swap分区

每台服务器都要操作，因为k8s不想使用swap分区来存储数据，使用swap会降低性能

[root@k8s-master ~]# swapoff -a  #临时关闭
[root@k8s-master ~]# sed -i '/swap / s/^(.*)$/#1/g' /etc/fstab	#永久关闭

5、重新命名主机，修改hosts文件

hostnamectl set-hostname k8s-master
hostnamectl set-hostname k8s-node1
hostnamectl set-hostname k8s-node2
hostnamectl set-hostname k8s-node3

修改hosts文件，每台都需要

cat >> /etc/hosts << EOF
192.168.175.110 k8s-master
192.168.175.111 k8s-node1
192.168.175.112 k8s-node2
192.168.175.113 k8s-node3
EOF

6、安装kubeadm，kubelet，kubectl

kubeadm——》k8s的管理程序——》需要在master上运行——》用来建立整个k8s集群，背后执行了大量脚本帮助我们去启动k8s

kubelet——》在node节点上用来管理容器的——》管理docker，告诉docker程序去启动容器

master和node通信用的——》管理docker，告诉docker程序去启动容器

一个在集群中每个节点上运行的代理，它保证容器都运行在Pod中

kubectl——》在master上用来给node节点发号施令的程序，用来控制node节点的，告诉它们做什么事情，是命令行操作的工具。集群里每台机器都需要安装

添加kubernetes YUM软件源

cat > /etc/yum.repos.d/kubernetes.repo <<EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

安装kubeadm、kubectl、kubelet

yum install -y kubeadm-1.23.5-0.x86_64 kubectl-1.23.5-0.x86_64 kubelet-1.23.5-0.x86_64

master服务器启动kubelet服务，node节点服务器不启动，同时每台服务器都设置kubelet开机自启，因为kubelet是k8s在node节点上的代理，必须开机要运行的
```
systemctl start kubelet
systemctl enable kubelet
```

7、matser主机执行

部署Kubernetes Master

提前准备coredns：1.8.4的镜像，后面需要使用，需要在每台机器上下载镜像

[root@k8s-master ~]# docker pull coredns/coredns:1.8.4
[root@k8s-master ~]# docker tag coredns/coredns:1.8.4 registry.aliyuncs.com/google_containers/coredns:v1.8.4

初始化操作在master服务器上运行

kubeadm init  --kubernetes-version=v1.23.5 
--apiserver-advertise-address=192.168.175.110 
--image-repository registry.aliyuncs.com/google_containers 
--service-cidr=10.1.0.0/16 
--pod-network-cidr=10.244.0.0/16

192.168.175.110是master的IP

service-cidr 服务发布暴露——》dnat

执行效果如下——报错

[root@k8s-master ~]# kubeadm init --kubernetes-version=v1.23.5  
> --apiserver-advertise-address=192.168.175.110 
> --image-repository registry.aliyuncs.com/google_containers 
> --service-cidr=10.1.0.0/16 
> --pod-network-cidr=10.244.0.0/16
I0914 22:14:09.299430    8277 version.go:255] remote version is much newer: v1.25.0; falling back to: stable-1.23
[init] Using Kubernetes version: v1.23.10
[preflight] Running pre-flight checks[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:[ERROR FileContent--proc-sys-net-bridge-bridge-nf-call-iptables]: /proc/sys/net/bridge/bridge-nf-call-iptables contents are not set to 1
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
To see the stack trace of this error execute with --v=5 or higher[root@k8s-master ~]# cat  /proc/sys/net/bridge/bridge-nf-call-iptables
0
[root@k8s-master ~]# echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
0
[root@k8s-master ~]# cat  /proc/sys/net/bridge/bridge-nf-call-iptables
1

再重新执行，出现如下效果表示成功

Then you can join any number of worker nodes by running the following on each as root:kubeadm join 192.168.175.110:6443 --token s2i0jk.lzb24ty4zr2lflc6 --discovery-token-ca-cert-hash sha256:a3f085636033a0197ea153201fcbb2a712addd07a60146d2c53670931c4dfa29

按照提示操作

[root@k8s-master ~]# mkdir -p $HOME/.kube
[root@k8s-master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config           
[root@k8s-master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config

8、在node节点服务器加入k8s集群

[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-V8EWsC7x-1663404793270)(C:UsersAdministratorAppDataRoamingTyporatypora-user-imagesimage-20220914222851455.png)]

测试node节点是否能和master通信

ping k8s-master

不要在node节点上运行kubelet服务，不然会导致join失败，如已经运行了，建议关闭然后运行kubeadm reset命令然后再加入集群

[root@k8s-node1 ~]# kubeadm join 192.168.175.110:6443 --token s2i0jk.lzb24ty4zr2lflc6 --discovery-token-ca-cert-hash sha256:a3f085636033a0197ea153201fcbb2a712addd07a60146d2c53670931c4dfa29

9、查看master上的所有节点服务器

当status为NotReady时说明master和node节点之间的通信还是有问题的，容器之间通信还没有准备好

[root@k8s-master ~]# kubectl get nodes
NAME         STATUS     ROLES                  AGE     VERSION
k8s-master   NotReady   control-plane,master   13m     v1.23.5
k8s-node1    NotReady   <none>                 11m     v1.23.5
k8s-node2    NotReady   <none>                 9m      v1.23.5
k8s-node3    NotReady   <none>                 9m51s   v1.23.5

matser服务器需要安装网络插件flannel（在master节点执行），实现master上的pod和node节点上的pod之间通信。

[root@k8s-master ~]# vim  kube-flannel.yml 
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:name: psp.flannel.unprivilegedannotations:seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/defaultseccomp.security.alpha.kubernetes.io/defaultProfileName: docker/defaultapparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/defaultapparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:privileged: falsevolumes:- configMap- secret- emptyDir- hostPathallowedHostPaths:- pathPrefix: "/etc/cni/net.d"- pathPrefix: "/etc/kube-flannel"- pathPrefix: "/run/flannel"readOnlyRootFilesystem: false# Users and groupsrunAsUser:rule: RunAsAnysupplementalGroups:rule: RunAsAnyfsGroup:rule: RunAsAny# Privilege EscalationallowPrivilegeEscalation: falsedefaultAllowPrivilegeEscalation: false# CapabilitiesallowedCapabilities: ['NET_ADMIN', 'NET_RAW']defaultAddCapabilities: []requiredDropCapabilities: []# Host namespaceshostPID: falsehostIPC: falsehostNetwork: truehostPorts:- min: 0max: 65535# SELinuxseLinux:# SELinux is unused in CaaSPrule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: flannel
rules:
- apiGroups: ['extensions']resources: ['podsecuritypolicies']verbs: ['use']resourceNames: ['psp.flannel.unprivileged']
- apiGroups:- ""resources:- podsverbs:- get
- apiGroups:- ""resources:- nodesverbs:- list- watch
- apiGroups:- ""resources:- nodes/statusverbs:- patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: flannel
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: flannel
subjects:
- kind: ServiceAccountname: flannelnamespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:name: flannelnamespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:name: kube-flannel-cfgnamespace: kube-systemlabels:tier: nodeapp: flannel
data:cni-conf.json: |{"name": "cbr0","cniVersion": "0.3.1","plugins": [{"type": "flannel","delegate": {"hairpinMode": true,"isDefaultGateway": true}},{"type": "portmap","capabilities": {"portMappings": true}}]}net-conf.json: |{"Network": "10.244.0.0/16","Backend": {"Type": "vxlan"}}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-dsnamespace: kube-systemlabels:tier: nodeapp: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: kubernetes.io/osoperator: Invalues:- linuxhostNetwork: truepriorityClassName: system-node-criticaltolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cniimage: quay.io/coreos/flannel:v0.13.1-rc2command:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: quay.io/coreos/flannel:v0.13.1-rc2command:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: "100m"memory: "50Mi"limits:cpu: "100m"memory: "50Mi"securityContext:privileged: falsecapabilities:add: ["NET_ADMIN", "NET_RAW"]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespacevolumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/volumes:- name: runhostPath:path: /run/flannel- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg

Master服务器执行kubectl apply -f kube-flannel.yml命令，node节点重新加入集群，执行kubeadm reset再使用上方的kubelet init命令加入集群。

[root@k8s-master ~]# kubectl get nodes
NAME         STATUS   ROLES                  AGE   VERSION
k8s-master   Ready    control-plane,master   20m   v1.23.5
k8s-node1    Ready    <none>                 18m   v1.23.5
k8s-node2    Ready    <none>                 16m   v1.23.5
k8s-node3    Ready    <none>                 17m   v1.23.5

如果还是不行，考虑更换kube-flannel.yml文件，https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

k8s安装和部署详解