使用ESP8266驱动微雪e-paer墨水屏
前些时候使用Arduino nona小板子，成功驱动了微雪e-paer2.13墨水屏，但由于Arduino nona小板子内存小、主频低，虽然可以显示，但显示的内容受到限制，心感不爽，一直想把它移植到，STM32或ESP8266这样的32位新片上，现手上有STM32F103C8T6、ESP8266这种低档小板子，没办法，毕竟咱不是专用的，只能有什么用什么了，开干。
1、选择：STM32、ESP8266中选后者吧，有1M闪存，可以放图形或字库。
2、接线：接线是比较麻烦的，初学者往往都是从看别人程序开始的，如果程序不是自己写的（甚至看程序也是半懂不懂），就不知道管脚定义，无法连接，网上那些大咖往往不顾及初学小弟的苦，不屑写明，我这里注明。
功能引脚：
ESP8266 描述
VCC VCC 电源正(3.3V电源输入)
GND GND 电源地
SCK 14 SPI的CLK， 时钟信号输入
DIN 13 SPI的MOSI， 数据输入
CS 15 片选，低电平有效
BUSY 5 忙状态输出引脚（表示忙碌）
RST 2 复位，低电平有效
DC 4 数据/命令，低表示命令高表示数据
还看不懂下面有实物照片，查线头吧。
3、下程序：程序就不写了，下微雪示例，很标准，编译无错误。
4、学习改造：程序能跑起来后，自己琢磨，改成什么自己看着办吧。
[esp8266-e-paer2.13]
kan/* Includes ------------------------------------------------------------------*/
#include "DEV_Config.h"
#include "EPD.h"
#include "GUI_Paint.h"
#include "imagedata.h"
#include <stdlib.h>
/* Entry point ----------------------------------------------------------------*/
void setup(){printf("EPD_2IN13_test Demo\r\n");DEV_Module_Init();printf("e-Paper Init and Clear...\r\n");EPD_2IN13_Init(EPD_2IN13_FULL);EPD_2IN13_Clear();DEV_Delay_ms(500);//Create a new image cacheUBYTE *BlackImage;/* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */UWORD Imagesize = ((EPD_2IN13_WIDTH % 8 == 0) ? (EPD_2IN13_WIDTH / 8 ) : (EPD_2IN13_WIDTH / 8 + 1)) * EPD_2IN13_HEIGHT;if ((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {printf("Failed to apply for black memory...\r\n");while (1);}printf("Paint_NewImage\r\n");Paint_NewImage(BlackImage, EPD_2IN13_WIDTH, EPD_2IN13_HEIGHT, 270, WHITE);
#if 1 //show image for array printf("show image for array\r\n");Paint_SelectImage(BlackImage);Paint_Clear(WHITE);Paint_DrawBitMap(gImage_2in13);EPD_2IN13_Display(BlackImage);DEV_Delay_ms(2000);
#endif
#if 1 // Drawing on the imageprintf("Drawing\r\n");//1.Select ImagePaint_SelectImage(BlackImage);Paint_Clear(WHITE);// 2.Drawing on the imagePaint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);Paint_DrawRectangle(85, 10, 135, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);Paint_DrawLine(45, 15, 45, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);Paint_DrawLine(25, 35, 70, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);Paint_DrawCircle(45, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);Paint_DrawCircle(110, 35, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);Paint_DrawString_EN(140, 15, "waveshare", &Font16, BLACK, WHITE);Paint_DrawNum(140, 40, 123456789, &Font16, BLACK, WHITE);Paint_DrawString_CN(140, 60, "你好abc", &Font12CN, BLACK, WHITE);Paint_DrawString_CN(5, 65, "微雪电子", &Font24CN, WHITE, BLACK);EPD_2IN13_Display(BlackImage);DEV_Delay_ms(2000);
#endif
#if 1 //Partial refresh, example shows time printf("Partial refresh\r\n");EPD_2IN13_Init(EPD_2IN13_PART);Paint_SelectImage(BlackImage);PAINT_TIME sPaint_time;sPaint_time.Hour = 12;sPaint_time.Min = 34;sPaint_time.Sec = 56;UBYTE num = 20;for (;;) {sPaint_time.Sec = sPaint_time.Sec + 1;if (sPaint_time.Sec == 60) {sPaint_time.Min = sPaint_time.Min + 1;sPaint_time.Sec = 0;if (sPaint_time.Min == 60) {sPaint_time.Hour = sPaint_time.Hour + 1;sPaint_time.Min = 0;if (sPaint_time.Hour == 24) {sPaint_time.Hour = 0;sPaint_time.Min = 0;sPaint_time.Sec = 0;}}}Paint_ClearWindows(140, 90, 140 + Font20.Width * 7, 90 + Font20.Height, WHITE);
Paint_DrawTime(140, 90, &sPaint_time, &Font20, WHITE, BLACK);num = num - 1;if (num == 0) {break;}EPD_2IN13_Display(BlackImage);DEV_Delay_ms(500);//Analog clock 1s}
#endifprintf("Clear...\r\n");EPD_2IN13_Init(EPD_2IN13_FULL);EPD_2IN13_Clear();printf("Goto Sleep...\r\n");EPD_2IN13_Sleep();free(BlackImage);BlackImage = NULL;
}
/* The main loop -------------------------------------------------------------*/
void loop()
{//}
除了主程序，还有图形数据，太长，不粘贴了，给地址大家去下。
微雪示例程序地址：https://www.waveshare.net/wiki/E-Paper_ESP8266_Driver_Board
实物照片，红底看着是不是很喜庆啊！
